This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
Ziton ZP3-PR1 Integral Printer Kit for ZP3 panel
SKU
67702
£760.28 £633.57
Ziton ZP3 Series - ZP3-PR1 Printer Kit EN54 (67702)
The Ziton ZP3-PR1 is a 24 character dot matrix printer that can be fitted to the front door of a ZP3 control panel. The kit comprises a printer module, printed circuit driver board and the necessary mounting hardware to fit the unit.
The printer is software controlled with operating parameters configured in the fire alarm system set-up programme to respond to a comprehensive range of system events. Fire alarms, faults, panel operations and activated outputs are automatically printed out as they occur, with facilities to suppress any event category - for example print fire alarms, suppress disablements.
Easily installed, the self-contained printer module is clamped to the rear of the panel door in line with an aperture provided as standard on all ZP3 control panels. Data connections are by means of ribbon cable, with power supply provided by plug and socket arrangement.
| Key Features |
|---|
| > Kit comprises printer module, printed circuit driver board and necessary mounting hardware > 64 character ASCII upper and lower case printer > Easily installed > Operation and maintenance reports > Paper roll and ink ribbon cartridge replaced without opening panel |
| Manufacturer | Ziton |
|---|---|
| MPN | 67702 |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Code: | 67702 |
| Description: | Ziton ZP3 Series - ZP3-PR1 Printer Kit EN54 |
| Dimensions: | W:145mm x H:66mm x D:96mm |
| Compatibility: | ZP3 control panels |
| Communication ports: | Printer PCB - SSB (Synchronous Serial Bus) / Printer - Parallel interface-single direction 8 bit data bus |
| Operating voltage: | 5 VDC +/-5%, current 12 mA 24 VDC +/-10%, current (stand by) 19 mA, (active) 32 mA, (printing) 80 mA |
| Power supply type: | 5 VDC |
| Operating temperature: | -10 to +60°C |
| Relative humidity: | 10 - 90% max. non condensing |
| Monitoring: | Power supply LED green Transmission LED red (x2) |
| Character set: | 64 character ASCII upper and lower case |
| Mounting: | To rear side of panel front door by clamping bracket supplied |
| Character format: | 7 high x 5 wide dot matrix, 24 characters per line. Various special printing commands available |
| Printer consumables: | Ink ribbon cartridge ZP-PRC, 0.5 million character life. Paper roll ZP-PRR, 57.5mm (W), thickness 0.007mm OD less than 40mm |
| Regulatory: | CE, EEC89/336 compliant |
| Weight: | 450g |
More from Ziton
