This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
STX2410-E
£600.62 £500.52
Ziton EN 54-4 approved, 24 V, 10 A + 0.7 A intelligent power supply (STX2410-E)
The Ziton STX2410-E is an EN54-4 approved power supply, ideal for use in fire system applications. It features intelligent battery charging, monitoring and signalling. Regulated 27.6 VDC output will source up to 10 A into the load as well as providing up to 0.7 A for charging the standby batteries. The power supply output features electronic short circuit protection under both mains and standby battery operation.
Maximum battery life is assured through continuous active battery monitoring and a three stage charger, comprising bulk, absorb and temperature compensated final float phase depending upon battery condition. Once fully charged the product operates in Eco power saving mode - the batteries are charged for 4 hours in every 24 hour period while being continuously monitored. Deep discharge protection prevents premature battery failure when operating from standby for extended periods.
Key Features |
---|
> Installer friendly > Approved to EN54-4 / CPR > Up to 10 A current to load at 27.6 VDC nominal regulated output > Self contained box houses up to 2x 17 Ah batteries > Deep battery discharge protection > Fault indicator LED (Yellow) flashes on detection of output fault, battery fault, charger fault and mains failure > Mains indicator LED (Green) showing mains present > Fault diagnostics LED, inside unit > 2 x Relay outputs: Fault & Mains Fault > Temperature compensated charging > Wide input voltage range > EcoCharge technology to reduce current consumption > Battery monitor detects battery missing, low battery, short-circuit, reverse connection & circuit impedance error > Electronic overload protection shuts down output until overload or short circuit is removed |
Manufacturer | Ziton |
---|---|
MPN | STX2410-E |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Code: | STX2410-E |
Description: | Ziton EN 54-4 approved, 24 V, 10 A + 0.7 A intelligent power supply |
Dimensions: | 400 x 200 x 80mm |
Operating voltage: | 110 to 240 VAC |
Current consumption: | 4 A max. at full load |
Output: | Voltage: 27.6 VDC Output current: 10A Ripple: 100 mV max. Constant current charge: 0.7 A |
Standby battery: | Capacity: Up to 2 x 17 Ah Charging: Constant current bulk charging to 80% capacity within 24 hours. Float charging to 100% within 48 hours Deep discharge protection:Threshold voltage 21V Low battery warning threshold: 23V |
Operating temperature: | -10 to +40°C |
Storage temperature: | -20 to +80°C |
Relative humidity: | 75% non condensing |
Local indicators: | Front: Green LED - mains supply, Yellow LED - fault Inside: Orange LED - fault diagnostics |
Regulatory: | EN54-4 certified |
Signalling output: | Fault relay: 100 mA at 60 VDC N/C contacts Mains fault relay: 100 mA at 60 VDC N/C contacts |
Weight: | 6.4 kg excl. batteries |