This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
Ziton DT Single-IR Hydrocarbon Complies with FM 3260 EN54 certified Certified SIL 2 capable ATEX Directive
SKU
X5200G
£5,906.57 £4,922.14
Ziton X5200G UVIR Hydrocarbon Flame Detector
The Ziton X5200 UVIR Flame Detector meets the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The mounting arrangement allows the UV and IR sensors to monitor the same hazardous location with a 90 degree cone of vision. When both sensors simultaneously detect the presence of a flame, an alarm signal is generated. The detector has Division and Zone explosion-proof ratings and is suitable for indoor and outdoor use. The standard output configuration includes fire, fault and auxiliary relays. An optional 0 - 20 mA output with HART can be provided in addition to the 3 relays.
Typical applications include:
— Munitions
— Petrochemical applications
— Turbines
— Refineries
| Key Features |
|---|
| > Complies with FM 3260 > EN54 certified > Certified SIL 2 capable > ATEX Directive compliant > EQP models available > A new level of false alarm rejection > Responds to a fire in the presence of modulated blackbody radiation (i.e. heaters, ovens, turbines) without false alarm > FDT/DTM capable > High speed capability > Microprocessor controlled heated optics for increased resistance to moisture and ice > Automatic, manual or magnetic optical integrity testing - no external test lamp required > Easily replaceable optical integrity plate > Fire, fault and auxiliary relays standard > MODBUS RS-485 communication > 0 to 20 mA isolated output (optional) > Pulse output for compatibility with controller based systems (optional) > A tri-color LED on the detector faceplate indicates normal condition and notifies personnel of fire alarm or fault conditions > Mounting arm allows easy sighting > Integral wiring compartment for ease of installation > Class A wiring per NFPA-72 > Meets NFPA-33 response requirement for under 0.5 second (available when model selected) > RFI and EMC Directive compliant > Built-in data logging / event monitoring |
| Manufacturer | Ziton |
|---|---|
| MPN | X5200G |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Code: | X5200G |
| Description: | Ziton X5200G UVIR Hydrocarbon Flame Detector |
| Operating voltage: | 24 Vdc nominal (18 Vdc minimum, 30 Vdc maximum). Maximum ripple is 2 volts peak-to-peak |
| Power consumption: | 2.8 watts @ 24 Vdc nominal 17.5 watts @ 30 Vdc with EOL resistor installed and heater on maximum |
| Relays: | Contacts rated 5 amperes at 30 Vdc Fire Alarm: — Form C (NO and NC contacts) — normally de-energised — latching/non-latching Fault: — Form A (NO contacts) — normally energised — latching/non-latching Auxiliary: — Form C (NO and NC contacts) — normally energised — latching/non-latching |
| Current output: | 0-20mA (± 0.3 mA), with a maximum loop resistance of 500 ohms from 18–19.9 Vdc, 600 ohms from 20–30 Vdc |
| Temperature range: | Operating: –40°C to +75°C Storage: –55°C to +85°C |
| Humidity range: | 0 to 95% relative humidity, can withstand 100% condensing humidity for short periods of time |
| Spectral sensitivity range: | IR wavelength: 4 - 5 microns UV wavelength: 185-245 nanometers |
| Field of view: | The detector has a 90 degree cone of vision (horizontal) with the highest sensitivity lying along its central axis |
| Wiring: | 16 AWG or 2.5 mm2 shielded cable is recommended |
| Enclosure material: | Copper-free aluminum (painted) |
| Conduit Entry Size: | 3/4 inch NPT or M25 |
| Warranty: | 3 years |
| Weight (approx): | Aluminium: 3.2kg (7lbs) |
More from Ziton
