This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
Ziton Ceiling mount VAD Red body, red flash, C-3-7.5
- Buy 10 for £57.43 £47.86 each and save 2%
- Buy 20 for £56.53 £47.11 each and save 3%
- Buy 50 for £55.63 £46.36 each and save 5%
The Ziton FAC350 is a general purpose, ceiling mounted LED beacon for fire alarm applications. It features a special base containing all wiring connections that allows easy removal/placement of the device. With an EN54-23 approved coverage pattern of C-3-8.9, each FAC350 may be mounted up to 3m high and and provide a 8.9m cylinder diameter coverage. A room size of 6.3 x 6.3m square room may therefore be covered with a single device.
Allows faster installation and maintenance due to an innovative mounting base. Dispensing with the need for locking screws, these beacons use TimeSaver™ bases from the 630 series detectors. Heads are locked onto the base with a “twist and click” action, allowing fitting or removal at any time as the base is the only component that needs to be wired. The cabling requirement is reduced so commissioning time and costs are naturally reduced as well.
A specially designed lens emits a uniform light output over the specified coverage area. The flash rate of the beacon may be adjusted during installation, with a selection of 0.5Hz or 1Hz.
The mechanism for locking the device to the base may be activated, if required. Once activated, a special tool is required to remove the beacon from the base.
| Key Features |
|---|
| > Ceiling mount > Red body, red flash > Automatic synchronisation > Anti-Tamper locking mechanism > Shallow mounting base > Wiring directly to base > Flash rate selectable |
| Manufacturer | Ziton |
|---|---|
| MPN | FAC350 |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
| Code: | FAC350 |
| Description: | Ziton Conventional VAD, Shallow Base, Ceiling Mount - Red Flash |
| Dimensions: | Dia:100 x D:81mm |
| Operating voltage: | 17 to 60 VDC |
| VID: | 0.5 or 1 Hz 30 or 60 flashes/min |
| Operating temperature: | -25 to +70°C |
| Relative humidity: | 5 to 95% non-condensing |
| IP rating: | IP21, indoor |
| Operation: | Continuous |
| Current consumption: | 20mA @ 0.5 Hz / 40mA @ 1 Hz |
| Flash rate: | 0.5Hz or 1Hz |
| Automatic synchronisation: | Phased start |
| Line monitoring input: | Polarised input |
| Housing: | High impact polycarbonate |
| Flash colour: | Red |
| Regulatory: | EN54-23 certified Light coverage: C-3-8.9 Mounting position: Ceiling Mounting height: up to 3m Floor coverage: up to 8.9m diameter |
| Housing colour: | Red |
| Weight: | 215g |
More from Ziton
