Ziton A45E-2 Single monitored input module

The Ziton A45E-2 addressable interface (input unit) is designed for installation within the enclosure of equipment associated with a fire detection system(s). The unit is installed directly onto the ZP loop wiring, carries a system address and enables signals from associated equipment to be interfaced into the fire alarm system. Input signals are fully displayed at the control panel and can be programmed to activate any system output.

By routing loop wiring and installing interfaces adjacent to input equipment, system integrity is increased and the need for long spur wiring between equipment terminals and the fire alarm interface is eliminated.

Approved to EN54-18, the A45E-2 can be installed singly, or used in groups to provide multi-way inputs from equipment such as volt free, zonal outputs from conventional fire alarm systems or flow valves from sprinkler installations. Housed in a low profile, single width moulding, the interface is designed to clip directly onto a standard DIN rail fixing or be installed in a SMB-DIN1 box (2 unit capacity), or a SMB-DIN2 box (4 unit capacity).

Installed as part of an addressable system, up to 127 line devices (detectors, call points or interface units) may be connected to each of the control panel loops. All loop devices incorporate switch settings enabling them to be assigned a unique address which is polled by the panel every 2 seconds.

A red LED indicator, positioned on the front moulding, flashes when the interface has operated, providing clear identification of the input signal source.