This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
EV-HIOP-SB-R
£76.20 £63.50
Nittan EV-HIOP-SB-R Evolution Addressable High Output Sounder Beacon (Red Flash - No Isolator)
- Buy 10 for £75.60 £63.00 each and save 1%
- Buy 20 for £75.00 £62.50 each and save 2%
- Buy 40 for £74.40 £62.00 each and save 2%
IP65 rated as standard, the EV-HIOP-SB-R is an extremely cost effective Type B outdoor wall mounted Red LED Sounder / Beacon (VAD) and is available in Versions with and without Short Circuit Isolator. It comes with 32 alarm tones (3 Approved) to choose from and individually controlled alarm and alert tones, allowing customers to choose a combination that works for any installation. It is EEPROM Addressed (Programmer) and features FSK signalling protocol for robust, reliable communications.
*Note:+ve and -ve isolator styles cannot be mixed on a system.
Not compatible with Advanced MxPro4 (Mx4000) Panel. Please use Non-SCI model.
Contact Nittan Technical Support for more details and information on panel compatibility.
Key Features |
---|
> IP65 rated - no isolator > 32 Tones DIP Switch Selected (3 Approved Tones) > EEPROM Addressed (Programmer) > FSK Signalling Protocol > Beacon Rating W 2.4-3.0 / 22m3 |
Manufacturer | Nittan |
---|---|
MPN | EV-HIOP-SB-R |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Manufacturer: | Nittan |
Product Code: | EV-HIOP-SB-R |
Sounder Device: | Rocking Armature Transducer |
Sounder Output: | Up to 95 dB(A) @ 1 m (Tone/Angle dependent) |
Sounder Tones: | 32 Tones DIP Sw select (3 Approved Tones) |
Beacon Type: | Type B Outdoor |
Beacon Device: | High Power LED Red |
Beacon VAD Specification: | W 2.4-3.0 / 22m3 |
Operating Loop Voltage: | 24V DC to 38V DC |
Quiescent Current: | 200µA |
Sounder Operating Current: | 20mA |
Current in short circuit: | 13mA |
Operating Temperature: | – 25°C to + 70°C |
Storage Temperature: | – 25°C to + 70°C |
Relative Humidity: | ≤ RH95% non-condensing |
I.P. Protection Rating: | IP65 |
Cable terminals: | 0.75 to 2.5 mm2 |
Material: | ABS |
Dimensions: | Ø104mm x 91.5mm |
Weight: | 250g |
Approvals / Standards: | EN54-3: 2001 / A2: 2006 EN54-17: 2005 / AC: 2007 EN54-23: 2010 |