This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
EV-HIOP-BCN-SCI
£89.92 £74.93
Nittan EV-HIOP-BCN-SCI High Output Beacon with -ve Isolator EN54-13 White Flash
- Buy 10 for £89.21 £74.34 each and save 1%
- Buy 20 for £88.50 £73.75 each and save 2%
- Buy 40 for £87.79 £73.16 each and save 2%
The Nittan Evolution EV-HIOP-BCN-SCI is a Type B Addressable Outdoor High Output Beacon (White LED), with integral –ve line Short circuit isolator and is compatible with Evolution analogue addressable system devices.
The device enclosure is waterproof to IP65 rating and is suitable for Indoor or Outdoor installation.
It comes with 3 Approved Beacon Flash settings to choose from, allowing customers to choose which works best for any installation.
The address may be set using EV-AD2-EXT handheld programmer using the Universal Addressing Lead.
The Short Circuit Isolator will protect the system, whilst allowing the device to continue communication from the opposite side. The isolator will self-reset when the fault clears.
SCI Variant Not compatible with Advanced MxPro4 (Mx4000) Panel. Please use Non-SCI model. It is not possible to mix +ve and -ve isolator styles on a system.
All wiring must conform to the current edition of IEE Wiring regulations and BS5839 Part 1
All loop Cable Screens shall be connected together, but must be Isolated from Ground. Cable Screens shall be connected to Earth Ground within the Control Panel ONLY.
Key Features |
---|
> IP65 rated > Type B Outdoor Beacon With/Without -ve Isolator* > EEPROM Addressed (Programmer) > FSK Signalling Protocol > Beacon Rating W 2.4-7.5 / 135m3 |
Manufacturer | Nittan |
---|---|
MPN | EV-HIOP-BCN-SCI |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Beacon Type | Type B Outdoor |
Beacon Device | High Power White LED |
Beacon VAD Specification | W 2.4-5.5 / 73m3 W 2.4-7.5 / 135m3 |
Operating loop voltage | 24 to 38 Vdc |
Quiescent current | 200 µA |
Alarm current | 20 mA |
Current in short circuit | 13 mA |
Operating temperature | -25°C to +70°C |
Storage temperature | -25°C to +70°C |
Relative humidity | < RH 95% (Non-condensing) |
Cable terminals | 0.75 to 2.5 mm2 |
Material | ABS |
Weight | 190 g |
Dimensions Flush | Ø104mm x 76.5mm |
I.P. Protection Rating | IP65 |
Test Standards | EN54-17: 2005 / AC: 2007 EN54-23: 2010 |
CPR Certificate | 0905-CPR-00465 |
DoP Number | 00465 |