This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
5000-102
£928.20 £773.50
Fireray 5000 Motorised Reflective Auto-Aligning Beam Smoke Detector, up to 100m (5000-101)
The Fireray® 5000 motorised reflective, auto-aligning infra-red beam smoke detector (5000-101) can be installed with up to two detector heads per system, saving on installation time and costs. Each system controller houses two pairs of fire and fault relays, one per detector. Includes pioneering technology that fully addresses the needs of the installer and user and is ideally suited for protecting large areas where the use of traditional detectors would prove to be too difficult and/or costly to install.
The Fireray® 5000 combines an infra-red transmitter and receiver in the same discrete unit and operates by projecting a well-defined beam to a reflective prism, which returns the beam to the receiver for analysis. Smoke in the beam path causes a drop in power which, if below a pre-determined level, results in an alarm signal.
This box contains a system controller, detector head plus four reflective prisms.
Key Features |
---|
> System Controller (low level) > Detector head > 4x reflective prisms > Suitable for distances of 50m to 100m > Separate fire and fault relays > Integral LASER alignment > Auto-Align fast automatic beam alignment > Contamination compensation > Logs the 50 most recent events > Programmable sensitivity and fire thresholds > 20mm cable gland knock-outs on system controller > 2-wire interface from system controller to detector > Working optical path for detector alignment > Ideally suited protecting large areas where use of traditional detectors would be difficult/costly to install > 5 year warranty |
Manufacturer | Fire Fighting Enterprises |
---|---|
MPN | 5000-102 |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Product: | FireRay 5000 Motorised Reflective Auto-aligning Beam Smoke Detector |
Product code: | 5000-102 |
Dimensions: Systems Controller: Detector: Reflector: | W:202mm x H:230mm x D:87mm (incl. base) W:134mm x H:131mm x D:134mm W:100mm x H:101mm x D:10mm |
Detection range: | 100m |
Optical wavelength: | 850nm near infrared (invisible) |
Operating voltage to system controller: | 14 - 36 VDC |
Operating current, constant (typical): | 1 detector: 5.5mA; 36mA in fast alignment mode 2 detectors: 8mA; 36mA in fast alignment mode |
Response threshold/ sensitivity (default 35%) | 0.45 - 3.98 dB (10 - 60%) |
Delay (user settable, default 10 sec): | Alarm: 2 - 30 seconds Fault: 2 - 30 seconds |
Operating distance (separation): | 8 - 100m (4 reflectors required for >50m) |
Max. angular alignment of detector: | + 3.5oC |
Contact voltage: | 0.1 - 36VDC - Fire & Fault relays (VFCO) |
Contact current: | 0.1 - 100 mA - Fire & Fault relays (VFCO) |
Cables: | 2 core, dedicated, 0.5 to 1.6mm (24-14 AWG); Length (system controller to detector) 100m |
Operating temperature: | -10 to +55 °C |
Storage temperature: | -40 to +85 °C |
Humidity: | 0 - 93% (non-condensing) |
IP Rating: | IP54 |
Housing flammability rating: | UL94 V0 polycarbonate |
CPR Reference: | 0832-CPR-F0390 |
UL file: | S3417 |