This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
S54312-F6-A1
£306.66 £255.55
Siemens FDCL221-M Cerberus PRO Multi-Line Separator Module
The Siemens FDCL221-M Cerberus PRO Multi-line Separator Module is used to avoid the breakdown of several stub lines in case of a short-circuit. The line separator is used where several stub lines are connected to the FDnet/C-NET at one point. The module can also be connected to 2 separate loops. For retrofitting of existing, collective systems to addressable Sinteso/Cerberus PRO fire detection systems.
The module has a total of 9 line separators. Each line separator is an electronic switch, integrated into the FDnet/C-NET. It separates the negative conductor in case of a short-circuit, so that the short-circuit-free side can continue to operate.
The line separator has connections for the detector lines, connections for the stub lines (T-taps), jumpers for programming of operation mode (1-loop or 2-loop mode), yellow LED for the status indication signals the short-circuit separation.
Key Features |
---|
> Multi line separator module, addressed (FDnet/C-NET) > Automatic module with several separate line separators > Formation of stub lines (T-branches) in the FDnet/C-NET > Operation of the module in one or two loops > Individual addressing of line separators for easy location identification > Status indicator (LED) for each line separator > Communication via FDnet/C-NET (addressed individually) > Easy installation and connection of the stub lines > Installation in intermediate distributor or fire control panel > Protected electronics > Integrated alarm indicators (LEDs) for signaling the line separation |
Manufacturer | Siemens |
---|---|
MPN | FDCL221-M |
Primary Power Source | 24V DC |
System Type | Addressable |
Protocol Compatibility | Siemens Cerberus |
Colour | White |
Warranty | 5 Years |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Product: | Siemens Multi-line Separator Module |
Product code: | S54312-F6-A1 |
Dimensions: | W:130mm x H:90mm x D:20mm |
Standard: | EN 54-17 |
Operating voltage: | DC 12 - 33 V |
Quiescent current: | 2.25 mA (9x 250 μA) or 2x 1 mA (4x 250 μA) |
Operating temperature: | -25 to +70oC |
Storage temperature: | -30 to +75oC |
System compatibility: | FDnet -> FS20, AlgoRex, SIGMASYS C-NET -> FS720 |
Communication protocol: | FDnet/C-NET |
Relative humidity: | ≤95 % rel. |
Colour: Housing colour: | Pure White (RAL 9010) Pure White (RAL 9010) / Transparent matte |
Protection category: | IP30; IP65 with ext. housing |