This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
400003FIRE-0003X
£34.20 £28.50
Eaton Addressable Multi-mode Heat Sensor, EN54 Systems, White Plastic, Multi-Mode (400003FIRE-0003X)
- Buy 10 for £33.67 £28.06 each and save 2%
- Buy 20 for £33.14 £27.62 each and save 3%
- Buy 50 for £32.62 £27.18 each and save 5%
The Eaton Cooper CAH330 Addressable Multi-Mode Heat Detector can be set to one of 3 modes 77ºC / 92ºC and rate of rise. These sensors are designed to be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.
This range of intelligent addressable sensors have been specifically designed to operate with Eaton’s intelligent addressable fire systems.
All sensors are third party approved to the relevant section of EN54 (part 7 for smoke detectors, part 5 for heat detectors and part 17 for short circuit isolators).
Key Features |
---|
> Eaton Multi-mode Heat Sensor > Addressable (soft) > White > Integral short circuit isolator > Single address > 360° visibility LED using lightpipe technology > Drift compensation > Aesthetically pleasing > Quick and simple to install > Wide viewing angle for increased LED visibility > Common mounting base > Positive “lock” indication > Discreet design for any decor > Easy to maintain/service |
Manufacturer | Eaton |
---|---|
MPN | CAH330 |
Primary Power Source | 24V DC |
System Type | Addressable |
Protocol Compatibility | Eaton |
Sensor Type | Thermistor |
Detectable Medium | Heat |
Colour | White |
Warranty | 1 Year |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Product: | Eaton Addressable Multi-mode Heat Sensor |
Catalogue no.: | 400003FIRE-0003X |
Dimensions: | Dia:100mm x D:44mm |
Current supply primary: | Battery / accumulator |
Voltage: | 18 - 30V dc |
Alarm current: | 5mA max. |
Integrated function: | Networkable via cable, VdS accepted |
Operating principle: | Thermo maximal |
Back-up battery included: | None |
Standby current: | 220 |
System wiring: | 1.5mm |
System typology: | Addressable, soft addressing |
Mounting method: | Surface, Ceiling in open area. Suitable for duct mounting |
Type of test/pause button: | Not applicable |
Cable entry: | Rear |
Max. no. networkable: | 200 |
Operating temperature: | -10oC to +60oC (95% max humidity, non condensing) |
Response temperature: | 60oC |
Construction: | ABS |
Colour: | White (akin RAL9003) |
IP rating: | IP40 |
EN Certification standards: | EN54 Pt17 (Short Circuit Isolator) EN54 Pt5 (Heat & Point Detectors) |
Warranty: | 3 years |
Weight: | 0.076 kg |