This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
45681-276APO
£26.39 £21.99
Apollo XP95 / Discovery Ancillary Base Sounder - 45681-276APO
- Buy 10 for £26.17 £21.81 each and save 1%
The Ancillary Base Sounder is a local-area sounder designed for indoor use. It can be connected only to detection systems using Discovery or XP95 detectors and control panels with appropriate software.
Electrical Description
The Ancillary Base Sounder is loop-powered and requires no external power supply. It operates at 17–28V DC.
Operation
The sounder incorporates a base into which a loop-powered beacon or an XP95 or Discovery detector is fitted. It is powered by the control panel via the loop wiring to which it is connected. Since the sounder is switched by the remote indicator output of the associated detector or beacon no remote indicator facility is available.
A guaranteed sound output of 85dB(A) at 1 metre is achieved at a current consumption of only 3mA. The sounder generates very low current noise so that up to 126 sounders may be connected to a loop.
Mechanical Construction
The sounder is made of white polycarbonate with stainless steel contacts.
Device Addressing
The Ancillary Base Sounder responds to signals from the associated detector or beacon. It does not have an address of its own.
Communication
The sounder will operate only with control equipment using the Apollo protocol. The features of the Ancillary Base Sounder are available only when the sounder is connected to a control panel with the appropriate software.
Tone Frequency & Volume Control
The sounder produces an uninterrupted alternating tone of 990Hz for 0.5 seconds and 630Hz for 0.5 seconds. The volume control can be used to adjust the sound steplessly from 70dB(A) to 85dB(A). It should be noted that these sounders do not have a synchronisation feature or pulsed tone.
Watch the Videos
Key Features |
---|
> For use on XP95/Discovery systems > Sound output of 85dB(A) at 1 metre > Current consumption of only 3mA > Loop-powered > Responds to signals from the associated detector – does not have an address of its own > Adjustable volume control > IP23D rated |
Manufacturer | Apollo Fire Detectors |
---|---|
MPN | 45681-276APO |
Primary Power Source | 24V DC |
System Type | Addressable |
Protocol Compatibility | Apollo XP95, Apollo Discovery |
Colour | White |
Warranty | 10 Years |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Product code: | 45681-276APO |
Description: | Apollo XP95 Sounder Base - Ancillary |
Dimensions: | Diameter: 115mm x 38mm |
Performance: | Selectable volumes: 70dB(A), 71dB(A), 72dB(A), 73dB(A), 74dB(A), 75dB(A), 76dB(A), 77dB(A), 78dB(A), 79dB(A), 80dB(A), 81dB(A), 82dB(A), 83dB(A), 84dB(A),85dB (A) Tones: 1 |
Colour: | White |
Materials housing: | Polycarbonate |
Standards: | EN54-3 |
Approvals: | FG, CPR |
Polarity: | L1 & L2 are polarity sensitive |
Battery powered: | No |
Quiescent current: | 100μA (tested @ 24Vdc) |
Supply voltage: | 17 - 28Vdc |
Loop powered: | Yes |
External power supply required: | No |
Operating temperature: | –20°C to +60°C |
IP rating: | IP23D |
Humidity note: | 0 - 95% (no condensation or icing) |
Warranty: | 10 year |