This website uses cookies to ensure you get the best experience on our website. Read our cookie policy
SKU
Ei3018
£67.38 £56.15
Aico Ei3018 Mains Powered Carbon Monoxide Alarm with Lithium Back-Up
- Buy 10 for £65.76 £54.80 each and save 2%
The Ei3018 is a mains-powered Carbon Monoxide Alarm with rechargeable, tamper-proof, 10 Year+ lithium battery back-up. It utilises a unique and proven electro-chemical sensor to enable enhanced response times to CO. This sensor is individually tested and calibrated in Carbon Monoxide gas to ensure a high level of accuracy. When the device is in alarm the red LED flash rate will indicate the level of CO which has been detected.
The Ei3018 uses AudioLINK technology, which allows you to monitor real time data from the alarm directly via a smartphone or tablet using the AudioLINK App.
The Ei3018 can be installed and function as a standalone alarm or it can be interconnected either via hard-wiring or wirelessly using the Ei3000MRF SmartLINK module which enables it to communicate with up to 12 other compatible alarms and accessories.
SmartLINK compatible - just plug in an Ei3000MRF module to enable wireless interconnection with other compatible alarms, real-time notifications and data extraction of alarm activations and events via the SmartLINK Gateway and Portal.
The Ei3018 will self-check its sensors, internal circuitry and battery every 48 seconds. Any faults or issues found will be indicated by a combination of yellow LED flashes and/or audible beeps.
The memory feature allows an alarm that has previously activated to be identified easily via the red flashing LED.
A large Test / Silence button is fitted to the alarm to allow frequent testing. The silence function allows the alarm / system to be silenced in the case of a false alarm and for low battery / fault tones.
Key Features |
---|
> - Mains powered with 10 year rechargeable lithium back-up battery
- Contains a unique and proven electro-chemical Carbon Monoxide sensor
- SmartLINK compatible when used with the Ei3000MRF module for interconnection with other alarms and device monitoring capabilities
- AudioLINK enabled to allow extraction of device data to a user's smartphone or tablet
- Fully compatible with all other Aico alarms - works with hard-wired, RadioLINK or hybrid interconnecting systems
- Can hard-wire interlink with up to 12 devices including Ei3000 series, Ei140 series, Ei160e series and Ei2110e alarms
- Supplied with an easi-fit base for quick installation
- Memory feature - easily identify alarms which have previously activated
- Self-checks sensor, battery and internal circuitry regularly and indicates any faults
- Large test / silence button to facilitate regular testing and allows silencing in the case of false alarms, low battery and faults
- 5 year manufacturer's warranty > Meets the requirements of the 2022 Scottish Legislation for fire alarms in homes |
Manufacturer | Aico |
---|---|
MPN | Ei3018 |
EAN | 5099383006520 |
Warranty | 5 Years |
Colour | White |
Interlink Options | Hard-wire Interlink (RF Upgrade Available) |
Detectable Medium | Carbon Monoxide (CO) |
Sensor Type | Electrochemical |
Primary Power Source | Mains Powered (230V) |
Regional Compliances | 2022 Scottish Legislation Compliant, 2022 Welsh Legislation Compliant |
Write Your Own Review
Sort By:
No questions yet. Be the first to ask the question!
Sensor Type: | Electro-chemical Cell |
Supply Voltage: | 230V AC, 50Hz |
Power Consumption: | 0.25W (standby) |
Back-up Power: | Rechargeable lithium battery |
Sound Level: | 85 dB(A) at 3m |
Operating Temperature: | 0 to 35 degrees celcius |
Humidity Range: | 15% to 95% RH (non-condensing) |
Button Test: | Checks sensor, electronics and sounder |
Silence Function: | Silences alarm for 10 minutes Silences fault beeps for 12 hours |
AudioLINK: | Enabled |
SmartLINK: | Compatible via the Ei3000MRF module |
Indicator LED's: | Green - Power Red - Pre-Alarm / Alarm / Silence mode / Memory Yellow - Fault / End of life |
Memory: | Records last alarm event |
Fixing: | easi-fit base (included with the alarm) |
Material: | HIP UL 94 V0 Flame Retardant |
Dimensions: | 150mm x 55mm |
Weight: | 310g (Boxed 376g) |
Warranty: | 5 years |
Approvals: | CE Marked KM: 86596 BS EN 50291-1:2010+A1:2012 |